Schertler Amplification


Schertler is the Swiss brand known for outstanding value in acoustic instrument amplification.


Schertler Guilia-Y Anthracite

The ultra-compact GIULIA is ideal for small venues, home studios or for practice. Weighing in at just 6.3kg, the single channel amp has the same high quality sound, appearance and robust construction as its larger siblings DAVID and UNICO. Equipped with a 1” dome tweeter and 5” woofer, GIULIA offers 50W of bi-amplified power. Its input channel can accommodate both XLR and 1/4” Jack connectors, making it suitable for use with a wide range of microphones including Schertler’s DYN and STAT series, or the BASIK pickup. Phantom power (48V and 10V) is supplied. The input can also be used for a guitar or other high level line source, with the amplifier’s intelligent electronics automatically adapting to suit. The channel also has 3-band EQ and Warm low-pass filter to produce a warmer sound when used with bridge-mounted pickups. Separate Line and DI outputs enable connection to a mixer, subwoofer or other external device. GIULIA is also equipped with a high-quality digital reverb (controlled via potentiometer) and an Insert socket, enabling the connection of an external dynamics processor or a volume pedal. Weight: 6.3 kg (13.86lb). Dimensions: 27x18x28cm (10.6x7.1x11.2 in). Frequency Response: 80 Hz to 18 kHz (+/-3dB). Speakers: 1” dome tweeter, 5” woofer. Construction: Plywood. Channels: 1 channel. Outputs: DI, Line out. Phantom Power: 24V on XLR and 10V on 1/4" Jack. Effect: Digital reverb. Preamp: Class-A. Power: 50W Bi-amplified

$479.00

Schertler Guillia-Y Wood

The ultra-compact GIULIA is ideal for small venues, home studios or for practice. Weighing in at just 6.3kg, the single channel amp has the same high quality sound, appearance and robust construction as its larger siblings DAVID and UNICO. Equipped with a 1” dome tweeter and 5” woofer, GIULIA offers 50W of bi-amplified power. Its input channel can accommodate both XLR and 1/4” Jack connectors, making it suitable for use with a wide range of microphones including Schertler’s DYN and STAT series, or the BASIK pickup. Phantom power (48V and 10V) is supplied. The input can also be used for a guitar or other high level line source, with the amplifier’s intelligent electronics automatically adapting to suit. The channel also has 3-band EQ and Warm low-pass filter to produce a warmer sound when used with bridge-mounted pickups. Separate Line and DI outputs enable connection to a mixer, subwoofer or other external device. GIULIA is also equipped with a high-quality digital reverb (controlled via potentiometer) and an Insert socket, enabling the connection of an external dynamics processor or a volume pedal. Weight: 6.3 kg (13.86lb). Dimensions: 27x18x28cm (10.6x7.1x11.2 in). Frequency Response: 80 Hz to 18 kHz (+/-3dB). Speakers: 1” dome tweeter, 5” woofer. Construction: Plywood. Channels: 1 channel. Outputs: DI, Line out. Phantom Power: 24V on XLR and 10V on 1/4" Jack. Effect: Digital reverb. Preamp: Class-A. Power: 50W Bi-amplified

$479.00

Schertler David Anthracite

DAVID becomes the second member of Schertler's "next generation" acoustic amplifier series. This newly-designed 3-channel amp, combines a wealth of new features and updated technology with a new "look". DAVID's inputs will accommodate a microphone, an instrument and a stereo device such as a computer, MP3 player or CD. The instrument input and the Jack input on the microphone channel both feature a Bootstrap technology that enables the input to automatically adapt to any impedance. Some of the new DAVID amplifier's new features include: three channels, a range of controls including gain, switchable resonance (notch) filter, adjustable DI Out in the master section, mute switch and overload LED for each channel. A new digital reverb replaces the spring one found in the original David models. DAVID is also equipped with a high voltage CLASS-A preamp that has no integrated circuits and No Negative Feedback (NFB). Weight: 10 kg (22.04lb). Dimensions: 295x255x355mm. Frequency Response: 50 Hz to 20 kHz . Speakers: 1” dome tweeter, 6” woofer. Construction: Birch laminated. Channels: 3 independent channels. Inputs: Channel 1 Jack 6.3mm unbalanced, Channel 2 XLR balanced, Channel 3 Jack 3.5mm stereo. Outputs: DI, LINE. Phantom Power: 24V(nominal) and 10V on Channel 2, 10V on Channel 1. Effect: Digital reverb. Preamp: Class-A. Power: 70W + 30W Bi-amplified.

$799.00

Schertler David Wood

DAVID becomes the second member of Schertler's "next generation" acoustic amplifier series. This newly-designed 3-channel amp, combines a wealth of new features and updated technology with a new "look". DAVID's inputs will accommodate a microphone, an instrument and a stereo device such as a computer, MP3 player or CD. The instrument input and the Jack input on the microphone channel both feature a Bootstrap technology that enables the input to automatically adapt to any impedance. Some of the new DAVID amplifier's new features include: three channels, a range of controls including gain, switchable resonance (notch) filter, adjustable DI Out in the master section, mute switch and overload LED for each channel. A new digital reverb replaces the spring one found in the original David models. DAVID is also equipped with a high voltage CLASS-A preamp that has no integrated circuits and No Negative Feedback (NFB). Weight: 10 kg (22.04lb). Dimensions: 295x255x355mm. Frequency Response: 50 Hz to 20 kHz . Speakers: 1” dome tweeter, 6” woofer. Construction: Birch laminated. Channels: 3 independent channels. Inputs: Channel 1 Jack 6.3mm unbalanced, Channel 2 XLR balanced, Channel 3 Jack 3.5mm stereo. Outputs: DI, LINE. Phantom Power: 24V(nominal) and 10V on Channel 2, 10V on Channel 1. Effect: Digital reverb. Preamp: Class-A. Power: 70W + 30W Bi-amplified.

$799.00

Schertler Jam Anthracite

JAM becomes the third member of Schertler’s “next generation” acoustic amplification series. The new 5-channel “all-rounder” combines a comprehensive feature set with the updated technology and enhanced “look” that defines all the models in this latest range. Equipped with a 1” dome tweeter and 8” woofer, and featuring an optimized 2-way bass reflex construction, JAM offers 200W (150W + 50W) of bi-amplified power. The amplifier includes a balanced microphone (XLR) input, an unbalanced mic/instrument input and an input offering both balanced microphone and unbalanced mic/instrument options. Both instrument inputs feature a Bootstrap technology that enables the input to automatically adapt to any impedance. A separate stereo input channel will additionally accommodate devices such as a computers, MP3 or CD/DVD players. A 5th FX Return channel can also be used for inputting line level devices. The 3 main microphone/instrument input channels include a Gain control for input sensitivity regulation and 3-band EQ, with parametric mids on input channels 1 and 3 and a switchable resonance (notch) filter (240Hz/150Hz) on channel 2. Phantom power is supplied for condenser and electrostatic microphones. Each of these channels also features an overload LED. Channel 1 is additionallyequipped with a phase reverse switch to prevent feedback, or unwanted effects between the various channels. JAM’s Master Section controls include a new adjustable DI Out, a new Mute button, a Line Out enabling the connection of externalsystems, a digital reverb and an Insert for connecting an external dynamics processor. Connection options are further enhanced with an Aux Out (Channel 1) that also enables connection to other systems. A Low Cut filter (cutting frequencies below 180Hz) can be used with instruments that generate aggressive low frequencies. This also enables a separate subwoofer to be connected without causing any damage to the amplifier. JAM is additionally equipped with a high voltage CLASS-A preamp that has no integrated circuits and No Negative Feedback (NFB). Weight: 12.2 kg (26.89lb). Dimensions: 324x297x380 mm. Frequency Response: 40 Hz to 20 kHz . Speakers: 1” dome tweeter, 8” woofer. Construction: Birch laminated. Channels: 5 independent channels. Inputs: Channel 1 Jack 6.3mm unbalanced, Channel 2/3 XLR balanced, Channel 4 Jack 3.5mm stereo, Channel 5 2x Jack 6.3mm unbalanced. Outputs: DI, LINE, AUX. Phantom Power: 10V on Channel 1, 24V(nominal) and 10V on Channel 2, 24V(nominal) on Channel 3 Effect: Digital reverb with Decay. Preamp: Class-A. Power: 150W + 50W Bi-amplified.

$899.00

Schertler Jam Wood

JAM becomes the third member of Schertler’s “next generation” acoustic amplification series. The new 5-channel “all-rounder” combines a comprehensive feature set with the updated technology and enhanced “look” that defines all the models in this latest range. Equipped with a 1” dome tweeter and 8” woofer, and featuring an optimized 2-way bass reflex construction, JAM offers 200W (150W + 50W) of bi-amplified power. The amplifier includes a balanced microphone (XLR) input, an unbalanced mic/instrument input and an input offering both balanced microphone and unbalanced mic/instrument options. Both instrument inputs feature a Bootstrap technology that enables the input to automatically adapt to any impedance. A separate stereo input channel will additionally accommodate devices such as a computers, MP3 or CD/DVD players. A 5th FX Return channel can also be used for inputting line level devices. The 3 main microphone/instrument input channels include a Gain control for input sensitivity regulation and 3-band EQ, with parametric mids on input channels 1 and 3 and a switchable resonance (notch) filter (240Hz/150Hz) on channel 2. Phantom power is supplied for condenser and electrostatic microphones. Each of these channels also features an overload LED. Channel 1 is additionallyequipped with a phase reverse switch to prevent feedback, or unwanted effects between the various channels. JAM’s Master Section controls include a new adjustable DI Out, a new Mute button, a Line Out enabling the connection of externalsystems, a digital reverb and an Insert for connecting an external dynamics processor. Connection options are further enhanced with an Aux Out (Channel 1) that also enables connection to other systems. A Low Cut filter (cutting frequencies below 180Hz) can be used with instruments that generate aggressive low frequencies. This also enables a separate subwoofer to be connected without causing any damage to the amplifier. JAM is additionally equipped with a high voltage CLASS-A preamp that has no integrated circuits and No Negative Feedback (NFB). Weight: 12.2 kg (26.89lb). Dimensions: 324x297x380 mm. Frequency Response: 40 Hz to 20 kHz . Speakers: 1” dome tweeter, 8” woofer. Construction: Birch laminated. Channels: 5 independent channels. Inputs: Channel 1 Jack 6.3mm unbalanced, Channel 2/3 XLR balanced, Channel 4 Jack 3.5mm stereo, Channel 5 2x Jack 6.3mm unbalanced. Outputs: DI, LINE, AUX. Phantom Power: 10V on Channel 1, 24V(nominal) and 10V on Channel 2, 24V(nominal) on Channel 3 Effect: Digital reverb with Decay. Preamp: Class-A. Power: 150W + 50W Bi-amplified.

$899.00

Schertler ROY Amplifier

ROY - Schertler Group’s new top-of-the-range combo amplifier for acoustic instruments. This 400W, 7-channel amp provides a powerful yet comparatively lightweight system that is perfect for both stage and studio. Equipped with a 1” horn, two 8” subwoofers and featuring the same hi-end Class A preamp found in other Schertler amplifiers, ROY delivers the rich, high-quality sound that has become synonymous with this product family, while providing the user with even greater flexibility. ROY has 4 input channels with various mic / instrument combinations, un i n s e r t (as on a professional mixer), 3-band EQ and phantom power; an additional unbalanced instrument input channel; a stereo input channel for playback devices and an FX return / additional input channel. ROY’s Master section includes both a digital reverb with decay and a new digital Multi-Effect (on a separate buss). This intuitive control surface provides a comprehensive mixing facility for easy set-up and on-stage adjustments during performances. Highly effective as a stand-alone portable amplification system for soloists or small groups, ROY also offers a range of output options for connecting to external systems: Add a separate subwoofer to enhance the low frequency ranges of certain instruments, or to create a compact 3-way active PA system. Connect to a mixing console for larger-scale applications. The addition of a headphone preamp provides a handy monitoring facility for both live performance and recording applications, making ROY a powerful and practical “all rounder”. Amplifiers are available in a choice of wood or anthracite finishes. The more delicate wood finish is perfect for studio or home use, blending with a range of room interiors. The anthracite finish is designed for performance and touring applications, where a more robust exterior finish is required.Weight: 22.2 kg (48.5lb). Dimensions: 357x415x510 mm. Frequency Response: 40 Hz to 20 kHz . Speakers: 1” dome tweeter, 2x 8” woofer. Construction: Birch laminated. Channels: 7 independent channels. Inputs: Mic In (channel 1-4) XLR, Instrument In (channel 3-5) 6.3mm Jack, Stereo In (channel 6-7) 3.5mm Jack and 6.3mm Jack, Insert (channel 1-4) and on master. Outputs: DI, LINE, AUX and Insert (channel 1-4) and on master. Phantom Power: 10V on Channel 3-5, 48V on Channel 1-4. Effect: Digital reverb with Decay and parallel Multi-effect. Preamp: Class-A. Power: 400W Bi-amplified.

$1,499.00
$1,499.00